« Back to Home

3 Things To Do Before Installing An Above-Ground Pool

Posted on

Installing an above-ground pool is a great way to enjoy the summer months. Plus, the good news is that you can actually install an above-ground pool yourself, which can help you save a lot of money and can leave more in your budget for a bigger, better pool. However, before you begin your installation, there are a few steps that you should take to ensure success.

1. Check for Underground Wires

To prepare your ground for your pool, you might need to do some digging in order to flatten the land. If you have underground utility wires, they might be closer to the surface than you think. If you accidentally cut into one of these wires with a shovel or other equipment, you could damage them and cause issues with your utilities, which can really put a damper on the upcoming pool time fun. Plus, you'll probably want to install your above-ground pool away from these wires in case work needs to be done on them later; then, you can avoid taking down your pool if/when this work needs to be done. Luckily, a utility locating service like Delta Geophysics Inc can help with this.

2. Flatten Your Land

If you want to avoid any issues with your pool, you will want the land to be nice and flat. You can dig away at higher inclines, then use that dirt in order to flatten the land. This will help you ensure that your pool is flat and level. When doing so, make sure that you pick up any rocks, sticks or other debris that could puncture a hole through the bottom of your pool.

3. Add Sand

After your land has been leveled, you will want to use a layer of sand. Since the sand is soft, it can help protect the bottom of your pool. Plus, you can scatter it around the outside perimeter of where your pool will be installed, which can provide a nice, soft surface for bare feet when you're climbing in and out of the pool and can help create a fun poolside vibe.

If you want to make the most out of your above-ground pool, you'll want to ensure that the ground is in good shape first. Luckily, if you follow these three steps, you should not have any problem preparing your land for your new pool. Then, you'll enjoy an easier installation and will be able to enjoy your pool that much more when it's installed.


Share